Hello,Welcome To The Official Website Of The DAQUAN Group!
Current Location:Home>News>Q & A

Lightweight Partition Panel Processing Methods for Cracks

Source:DQ   Date:2017/4/5 9:53:32

Lightweight Partition Panel Processing Methods for Cracks

      With the implementation of the national wall change policy, lightweight partition panel has become the leading product for internal and external wall, 1. the product cost is low, have price advantage; 2 it is dry operations, prefabricated construction, simple and quick. Lightweight partition panel in use, the crack problem has always been a problem in design units and construction units, Wuhan Daquan group after ten years of market exploration, implement a feasible scheme for lightweight partition panel of cracking problem, and successfully applied in the project.

Common crack of lightweight partition panel:

Panel joint with square tube, panel joint with panel, panel joint with line pipe



Reasons for the cracking:

Not do anti-cracking measures made of different materials, pipe line slot vibration.

DAQUAN treatment for crack 1: cut panel seam, perfusion with bonding material panel seam, fix with anti-crack tape, then plaster putty powder.




DAQUAN treatment for crack 2:Fix gypsum board

Surface leveling ② Pneumatic nail gun fixed gypsum board



Daquan make some improvement in the products and construction technique on cracking:

Product, product warranty increased from the original 10 days to 15 days, reduce product shrinkage, increase the stability of the products; Construction process, improve the wall panel adhesive production formula, R&D and production of adhesive by ourselves compared to outsourcing and wall panel adhesive have more advantages.

Want better reduce the cracking of lightweight partition panel after the installation, in the early choose factory supplier and control construction technology in the process of installation is critical, manufacturers choose above must choose company which is rich in do the project, the company's products through the test of the market, products have good stability, the construction case, more mature construction technology. Wuhan Daquan group was founded in 2005, focusing on the lightweight partition panel industry for more than ten years, is the pioneer of lightweight wall panel industry in central China, every year 600000 square meter of lightweight partition panel in domestic sales, export 300000 square meters.


Hot News
KeyWorks:

Lightweight Partition Panel Processing Methods for Cracks


All Rights Reserved:

http://www.dqwall.com/en/article-222.html Reprint Please Famous Sources

Hot Recommend